How the sun & shadow map works
Pick a home or tap a building and the map draws the buildings and trees around it in 3D, the sun's path for the chosen day, and the shadows they cast at any minute. It also adds up how long each side of the building is in direct sun — the hours a garden, a living room window or a solar panel would see.
How the hours are counted
For every 10 minutes of the day the sun's position is worked out for the spot, and a line is traced from the spot toward the sun. If a building or tree within 450 m, or a hill further off, is in the way, that slot is in shade. Walls are checked 1 m out from the wall at window height on the floor you pick (1.5 m up on the ground floor), on the two longest free walls facing each way; a wall joined to the neighbour's house is marked as shared. The roof and open ground are checked too, for this day, the equinox and both solstices.
Where the data comes from
Building outlines are OpenStreetMap's, with the parts of Ordnance Survey's OS OpenMap Local buildings that OpenStreetMap hasn't drawn. Heights and tree crowns come from the Environment Agency's national LiDAR composite (1 m) in England, put together from surveys flown over many years up to 2022, and in Wales from the Welsh Government's LiDAR survey of the country (1 m, flown 2020 to 2023). Buildings put up since a survey have their height estimated from OpenStreetMap floor counts, the home type in our records, or their footprint size. A roof of more than one height, such as a house with a single-storey kitchen extension, is split into parts, each at its measured height; an extension built since the survey counts as one storey, or two where an approved planning application there describes a two-storey extension. Hills on the horizon come from the Copernicus DEM (GLO-30). The basemap is OpenStreetMap via OpenFreeMap.
What to bear in mind
These are estimates, not a survey of a particular window. Roofs are drawn flat at the building's height, trees as the survey measured them (in winter the walls show a range, trees in leaf to trees bare), and the ground within 450 m as flat. Hours are for a clear sky: they compare homes, not forecast the weather. Hills further out, to 20 km, are counted from a 30 m elevation model; they are not drawn on the map. Where outlines join several homes into one block, the block's figures are for its outer walls. Extensions or extra floors added since the survey may not be reflected. For a block of flats the figures are for the whole building's walls, not one flat.
Where it works
England and Wales, cities, towns and countryside alike. A spot inside them can still have no 3D data where the LiDAR surveys left a gap; the map says so. Scotland and Northern Ireland are not covered.
Questions
- Which side of a house gets the most sun in the UK?
- Usually the south-facing side: it gets sun for most of the day all year. East and west walls get the morning or the evening sun, and in summer north walls see a little sun early and late. Neighbouring buildings and trees change this a lot, which is what the map shows for a particular house.
- Why does a wall show 0 hours?
- On that day the sun never reaches it unblocked: it faces away from the sun's path, or a building or tree in front of it keeps it in shade whenever the sun is on that side. Try the summer solstice to see the most it can get.
- How much less sun is there in winter?
- A lot. In London the sun is up for about 8 hours at midwinter against about 16.5 at midsummer (further north the gap is wider), and it stays low, so even short buildings cast long shadows. Each side's midwinter hours are shown under today's.